@scottimmons
Profil
Inscrit·e : il y a 1 semaine et 1 jour
HP LaserJet Pro M404dn Error 13.10: How to Clear a Paper Jam in the Output Area A print job stops halfway through, the HP LaserJet Pro M404dn displays a paper-jam warning, but the output tray looks almost empty. Pulling out the visible sheet does not always clear the message. The reason is that the printer monitors several points along the paper path, and a small torn fragment can remain inside even when the main sheet has been removed. The M404dn uses a laser printing mechanism with an internal paper transport path and a rear access door. When error 13.10, 13.11 or 13.13 appears, the printer is reporting a jam associated with the output area. The correct response is to inspect the complete path rather than repeatedly restarting the device. Follow the sheet's route backwards Think about where the paper was when printing stopped. If most of the page has already emerged, the obstruction is likely near the output bin or rear paper path. Begin with the output tray. Remove the loose sheets and gently pull out any visible jammed paper. Use both hands where possible, keeping the sheet aligned with the direction in which it normally travels. Do not yank a page that feels firmly trapped. Torn paper can leave small pieces behind, making the original problem harder to locate. If the sheet does not come out easily, open the printer's front access door using its release button. Then open the rear door and inspect the accessible paper path. The model-specific instructions in HP manuals show the relevant access points and the correct procedure for clearing output-area jams. The fragment nobody notices A printer can continue reporting a jam even after the main sheet has been removed. A narrow strip of paper may remain near a roller or inside the rear access area. Use a flashlight to inspect visible sections of the paper path. Look for: - Small torn corners or narrow paper strips. - Paper wrapped around an accessible roller. - Pieces caught near the rear door. - Foreign objects that may have entered the printer. Remove only material that is freely accessible. Never use scissors, screwdrivers or metal tools to reach into the mechanism. Avoid touching the internal fuser area, which can remain hot after printing. If the paper tears during removal, inspect the entire accessible path again before closing the doors. Why the same jam keeps returning Sometimes the printer is not actually jammed by a single sheet. The underlying cause may be related to paper handling. A stack of curled, damp or damaged sheets can feed inconsistently. Incorrectly adjusted tray guides may also allow paper to enter at an angle. For a recurring problem, remove the paper from the input tray and check its condition. Use clean, dry sheets of the correct size and type. Make sure the guides touch the paper stack without bending or compressing it. Also check that the tray is not overloaded. A stack that exceeds the marked capacity can cause feeding problems that appear to be output jams. A controlled restart, not repeated power cycling Once the visible obstruction has been removed, close the front and rear doors securely. Check that the paper trays are properly inserted and that no loose sheets remain in the output area. Turn the printer back on and wait for its initialisation process to finish. If the error disappears, print a single test page before sending a large document. If the same code returns immediately despite a clear paper path, the issue may involve a paper-presence sensor, roller mechanism or another internal component. At that point, professional inspection is more appropriate than further dismantling. Keep the repair specific to the M404dn The HP LaserJet Pro M404dn shares some components and procedures with other M304, M305 and M405 models, but their configurations are not necessarily identical. HP manuals provide the correct user and repair documentation for identifying access panels, paper-path components and maintenance procedures. For this printer, use the complete model designation when looking for instructions or replacement parts. An output-area jam is often caused by a small piece of paper rather than a major mechanical failure. Careful inspection, correct paper loading and proper removal of obstructions are the best first steps. If the warning persists after the accessible path is clear, the printer needs a more detailed technical diagnosis.
Forums
Sujets initiés : 0
Réponse crées : 0
Rôle dans le forum : Participant

